Steel Structure Counter Flow Open Water Cooling Tower
Application:Casting, forging, air compressor, central air conditioner, ground source heat pump, printing machine
MNTNK Application
" MSTNK" type apply to the low cooling temperature ( Temp . < 45℃ or not higher than the location wet bulb temperature too much ) or needs a small cooling range projects ( △T=5-10℃ )
MSTHK Application
Apply to the projects which have large cooling temp drop ( △T = 15-50℃ ) , or high temp inlet ( ≥45C℃) . If the work place has requirement to keep low noisy and enviromental protection , we also could provide Low noise type cooling tower .
Details
MSTNK Process principle
Without cooling coils, the heated working fluid be sprayed to the PVC fills, and reacts with cold inlet air for heat transferring, then the heat is exhausted out of the tower by the fan, and the working fluid is collected back to the water tank for circulating.
MSTHK Process principle
Simiary with MSTNK, but MSTHK model has two sides into wind, and the fan canister design to maximize. So that there has largest air flow space. Wide-chord hollow fan blade, reduce the nosie.
Characteristics
1. Steel structure is more stabilization
The tower out shell, water tank, support, exhaust air canister and other spare parts all are steel material. So the cooling towers have mechanical strength, good stability.
2. Cheaper
Relative to closed cooling tower, there is no cooling coils inside, simple structure. So the price will be more cheaper.
3. High-performance
Relative to FRP cooling tower, steel tower has stable structer, smooth operation, higher precision design standard, more secure performance indicators.
4. Easy installation & maintainance
Modular overall shipments, the lager models only need to connect the upper box and bottom box, it will reduce the installation difficulty and outerdoor operation cost.
There is maintenance tunnel inside and large space, convinent to clean pvc fills and replace parts.
5. Environmental protection
There is no enviroment pollution risk of steel material. After reached the end of the service life, the steel material also could be recycle without secondary pollution.
Technical Parameters of Cross Flow Open type
Model | Flow Rate（m³/h） | Fan | Pipe Size（DN) | Net weight(kg) | Operating weight(kg) | Dimension(mm) | |||||
Power | Diameter | Inlet | Outlet | Sewage | Supply | Machine Size L*W*H | Foundation sizeL*W | ||||
MSTHK-100 | 100 | 4 | 1500 | 100*2 | 125 | 25 | 25 | 1090 | 3900 | 1980*3200*3700 | 2080*3300 |
MSTHK-125 | 125 | 4 | 1800 | 125*2 | 150 | 32 | 25 | 1350 | 5050 | 2320*3600*3700 | 2420*3700 |
MSTHK-150 | 150 | 5.5 | 2000 | 125*2 | 150 | 32 | 25 | 1450 | 5900 | 2600*3800*3700 | 2700*3900 |
MSTHK-175 | 175 | 5.5 | 2000 | 125*2 | 150 | 32 | 25 | 1500 | 6560 | 2930*3800*3700 | 3030*3900 |
MSTHK-200 | 200 | 7.5 | 2400 | 150*2 | 200 | 32 | 25 | 1690 | 7660 | 3040*4300*3700 | 3140*4400 |
MSTHK-225 | 225 | 7.5 | 2400 | 150*2 | 200 | 32 | 25 | 1900 | 8750 | 2950*5080*4100 | 3050*5180 |
MSTHK-250 | 250 | 7.5 | 2400 | 150*2 | 250 | 40 | 40 | 1950 | 9250 | 3000*5300*4100 | 3100*5400 |
MSTHK-300 | 300 | 11 | 2800 | 150*2 | 250 | 40 | 40 | 2350 | 10600 | 3250*5550*4100 | 3350*5650 |
MSTHK-350 | 350 | 11 | 2800 | 150*2 | 250 | 40 | 40 | 2420 | 11700 | 3500*5800*4100 | 3600*5900 |
MSTHK-400 | 400 | 15 | 3000 | 150*4 | 300 | 40 | 50 | 2730 | 13150 | 3750*6050*4250 | 3850*6150 |
MSTHK-450 | 450 | 15 | 3000 | 150*4 | 300 | 50 | 50 | 2850 | 14500 | 4000*6300*4250 | 4100*6400 |
MSTHK-500 | 500 | 18.5 | 3000 | 150*4 | 300 | 50 | 50 | 3250 | 14750 | 4000*6300*4850 | 4100*6400 |
Notes：* Dates in the form is only for your reference, actual parameters should meet customers’ demands.
* Design conditions: maximum flow rate ≤450m³/h, operating environment temp.≤31.5℃, wet bulb temp.≤28℃,humidity not higher than 85%,elevation below 1000m. (Taking antifreeze measures below 0℃）
* Any queries for above parameters please contact our account executive.
Technical Parameters of Counter Flow Open type
Model | Flow Rate（m³/h） | Fan | Pipe Size（DN) | Net weight(kg) | Dimension(mm) | ||||||
Power | Inlet | Outlet | Sewage | Supply | Machine SizeL*W*H | ||||||
MSTNK-100 | 100 | 4 | 1800 | 125 | 125 | 25 | 25 | 1180 | 3300 | 2250*2250*4070 | 2350*2350 |
MSTNK-125 | 125 | 5.5 | 2000 | 150 | 150 | 32 | 25 | 1340 | 4015 | 2500*2500*4070 | 2600*2600 |
MSTNK-150 | 150 | 5.5 | 2000 | 150 | 150 | 32 | 25 | 1640 | 4870 | 2750*2750*4570 | 2850*2850 |
MSTNK-175 | 175 | 7.5 | 2400 | 150 | 150 | 32 | 25 | 1830 | 5720 | 3000*3000*4570 | 3100*3100 |
MSTNK-200 | 200 | 7.5 | 2400 | 200 | 200 | 32 | 25 | 2020 | 6630 | 3250*3250*4570 | 3350*3350 |
MSTNK-225 | 225 | 7.5 | 2400 | 200 | 200 | 32 | 25 | 2060 | 6800 | 3300*3300*4570 | 3400*3400 |
MSTNK-250 | 250 | 7.5 | 2400 | 200 | 200 | 40 | 40 | 2290 | 7650 | 3500*3500*4770 | 3600*3600 |
MSTNK-300 | 300 | 11 | 2800 | 250 | 250 | 40 | 40 | 2570 | 8750 | 3750*3750*4950 | 3850*3850 |
MSTNK-350 | 350 | 11 | 3000 | 250 | 250 | 40 | 40 | 2800 | 9860 | 4000*4000*4950 | 4100*4100 |
MSTNK-400 | 400 | 15 | 3300 | 300 | 300 | 40 | 50 | 3350 | 12350 | 4500*4500*5150 | 4600*4600 |
MSTNK-450 | 450 | 15 | 3300 | 300 | 300 | 50 | 50 | 3640 | 13900 | 4800*4800*5150 | 4900*4900 |
MSTNK-500 | 500 | 15 | 3600 | 300 | 300 | 50 | 50 | 4070 | 15000 | 5000*5000*5600 | 5100*5100 |
Notes：* Dates in the form is only for your reference, actual parameters should meet customers’ demands.
* Design conditions: maximum flow rate ≤450m³/h, operating environment temp.≤31.5℃, wet bulb temp.≤28℃,humidity not higher than 85%,elevation below 1000m. (Taking antifreeze measures below 0℃）
* Any queries for above parameters please contact our account executive.